Is your Monitoring Software ready for GDPR ?

GDPR is a new rule to be implemented in Europe on May 25th 2018. It stands for General Data Protection Regulation.
While it’s solely enforceable in Europe, we worked to adapt the general release of SECURITHOR for GDPR.

The key elements of GDPR are:

.Anonymizing collected data to protect privacy
The anonymity and safeguarding of data in Securithor is insured by encryption of key elements of the database. This modification starts at version 2.1.7. Should you have a lower version, contact MCDI to make arrangements for an update or an upgrade

From our older Monitoring Software: SAMM, WinSAMM, RX1000, or Securithor v1: we can convert your account data and upgrade your software to Securithor v2.1.7. Contact MCDI to purchase an upgrade.

From any SECURITHOR v2:we can update to 2.1.7. Update rights are included in your SECURITHOR support plan.
We also perform database maintenance when updating a Securithor v2. Database maintenance will help speed up your database and might prevent corruptions as well as detecting a bad HDD. Contact MCDI to confirm your update rights to version 2.1.7 or to renew your support plan.

• Requiring the consent of subjects for data processing:
Revise contracts with your subscribers for data collection.

• Providing data breach notifications
In the unlikely event you have notice a data breach, inform the subscribers that have been affected.

• Safely handling the transfer of data across borders

We can discuss options with you in case you need to operate across jurisdictions. Simple steps such as setting a vpn can be taken.

Update 2.1.7 rolling out

SECURITHOR 2.1.7 will start rolling out April 2nd with more than 40 new features and enhancements. You can get this important update as part of your support plan.
Contact us to make an appointment as updates are performed by the MCDI Support staff. Maintenance of your SECURITHOR database is done at the same time. You can renew your support coverage by contacting SECURITHOR sales staff.

Changes 2.1.5 => 2.1.7

SECURITHOR
-added additional items copied for the partition copy feature: schedules, cameras, omitted fields in for partitions and users

-added new account copying (Attachments, Installations, Partition Phone#, Users, Alarm Codes, Actions, Zones. *excluding shared items*) including partition copy feature

-added option to prevent operators from reorganizing the docking system (replaced autologin column in operator management)

-added tax number in account management

-added WAMSTOP, LBKSTOP, WAMRESTORE, LBKRESTORE to MCDI template

-added address notes for additional information to reaching the address on file

-added option to prevent operators from reorganizing the docking system

-improved STNetService and STReceiverService by making it relaunch quicker and even if closed on purpose

-keeping previously logged-in operator number when logging in

-allowing changing of alarm routing filters in STNet without having to delete and recreate a new entry

-showing account limit in red if a limit is in place

-hikvision and dahua talk update for new sdk

-added pre-populated templates for new installations (ContactID, SIA, MCDI)

-added Audit Trail feature for Securithor (AccountManagement/Cities/Templates/Operators/AdminComments/Installers/Groups/SMS/ServiceOrders/Settings). Viewable in STNet.

-added Ufone to SMS gateway (Pakistan)

-added notes for holiday user

-added showing holiday date range in alarm processing.

-added new alarm code types: fire/burglary/technical

-added PPP alarms to show map in Securithor

-added TVT and Cubitech Tribrid camera support (requires CAM module)

-added IDIS camera (requires CAM module)

-added Hungarian language

-added Italian language

-added csv FileImporter

-added basic codes (ACOM,RCOM,ATCP,RTCP,ASTR) to account 0 during installation

-added option in Securithor Settings to set MCB database location

-added tax number field to account management

-added saving ClickToDial recording to a specific folder and allowing reference from traffic window

-(added) cameras can now be linked to zone. (overrides alarm code camera)

-improved streplication by reporting descriptive error messages

-STTimeZoneSelector has a Save and Quit button available even when no change needed during installation

-reports speed optimizations

-new STNet replication monitor to better detect replication failure

-email management status now shows words instead of ambiguous numbers

-increased button size for SIP dialling window + added translations

-allowing video verification from alarm processing page even if the code being processed is not linked to a camera, as long as there is a camera and channel defined in the account

-dead man alarm is now active and plays priority sound 9. email/sms settings are dependent on alarm code settings rather than deadman settings.

-added clickable gpsp position sent by email

-changed sms management in STNet refreshing too often using a lot of processing

-changed panic type alarms only match to users now, not zone

-removed sorting of password field in call list causing confusion


STRECEIVER

-added support in SIA format for ^ character

-added Telsim sms Gateway (Cyprus)

-added Bosch UDP receiver support

-improved SIA2 parsing for multiple receivers without blocking communication by being stuck on the same alarm when the format is not standard

-improved sms buffer clearing code to prevent full buffer of received sms

-replaced Tirupathi SMS with PointSMS Gateway (India)

-accepting of SIA2 alarms where there is no / (forward slash) separating the partition and the code

-changed parsing of SIA2 comment alarm containing a colon (:)

WEB OPERATOR

-WebOperator traffic print + rights and custom watermark

Added Tax Number field

MCB

*not included in this version yet*. To be announced April 22nd.

SECURITHOR connecting Bosch D6100 Alarm Receiver

SECURITHOR is now handling alarm signals from Bosch D6100 through IP connection. The IP connection is standard in SECURITHOR 2.1.6 while serial connection is available to all SECURITHOR V2 since 2015.
The IP connection now brings new possibilities such as connecting from a  remote location.

Contact MCDI or your SECURITHOR power centre to get SECURITHOR or learn how you can update your SECURITHOR Alarm Software.  Thanks to Mathieu Racine at Novytec to make this possible. SECURITHOR Works with Bosch D6100

Online Starter course from SYSCOM

Join SYSCOM March 1st for a FREE online starter course on SECURITHOR. 3 hours online will show you how to operate Securithor and several advanced features such as Smartphone Panic button and Weboperator for Web Access. March 1st. FREE, in Spanish.
Register online at: https://www.syscom.mx/calendario/info/programa/136036

Conozca todo lo que puede hacer con Securithor, tome el curso básico de Securithor con nuestro distribuidor mayorista SYSCOM  inscripción gratis
https://www.syscom.mx/calendario/info/programa/136036

SECURITHOR WEBINAR

 

MCDI at INTERSEC DUBAI 2018

Meet us in Dubai for the 20th edition of Intersec. MCDI staff will be touring the show and meeting customers for private meetings. Contact us at securithor@mcdi.com or through Facebook Page www.facebook.com/securithor

While in Dubai, you can reach our GM Eric Methot until Jan 23rd  at +971 58 175 6977

intersec_2018